Configuring A Description For An Aggregation Group - H3C S3100-52P Operation Manual

Operation Manual – Link Aggregation
H3C S3100-52P Ethernet Switch
To do...
Configure the
system priority
Enter Ethernet
port view
Enable LACP
on the port
Configure the
port priority
Note:
Changing the system priority may affect the priority relationship between the
aggregation peers, and thus affect the selected/unselected status of member ports in
the dynamic aggregation group.

1.4.4 Configuring a Description for an Aggregation Group

Enter system view
Configure a description
for an aggregation group
Caution:
If you have saved the current configuration with the save command, after system
reboot, the configuration concerning manual and static aggregation groups and their
descriptions still exists, but that of dynamic aggregation groups and their descriptions
gets lost.
Use the command...
lacp system-priority
system-priority
interface interface-type
interface-number
lacp enable
lacp port-priority
port-priority
To do...
system-view
link-aggregation group
agg-id description
agg-name
Chapter 1 Link Aggregation Configuration
Optional
By default, the system priority is
32,768.
—
Required
By default, LACP is disabled on a port.
Optional
By default, the port priority is 32,768.
Use the command...
1-10
Remarks
Remarks
—
Optional
By default, no description
is configured for an
aggregation group.