H3C S3100-52P Operation Manual page 12

Operation Manual – Product Overview
H3C S3100-52P Ethernet Switch
VLAN mapping
Configuration of burst traffic for port rate limiting and
traffic policing
Configuration of priority remarking in VLANs
Redirecting traffic to an aggregation port group and
removing the outer VLAN tag after the traffic is
redirected to the uplink port or the aggregation port
group
Burst function
Creating a MIB view with the mask of a MIB subtree
Encrypting a plain-text password
Adding interface description and interface type in
linkUp/linkDown Trap message
Support of the DSA asymmetric key algorithm
Banner information of the FTP server
Displaying timestamp with the UTC time zone
Configuration of real-time monitoring of system running
status
Hot patching
Viewing and diagnosing hot-pluggable transceivers
Selective QinQ
Support of multiple types of protocol packets for BPDU
Tunneling
Customizing tunnel packet MAC addresses
Eight test types are added in HWPing, including DHCP
test, FTP test, HTTP test, DNS test, SNMP test, Jitter
test, TCP test, and UDP test
Maximum number of history records that can be saved
IPv6 management
Smart Link
Monitor Link
Added feature in Release 1602
Chapter 2 Correspondence Between Documentation
2-3
and Software
Manual
24-QoS-QoS Profile
27-SNMP-RMON
29-SSH
31-FTP-SFTP-TFTP
32-Information Center
33-System Maintenance
and Debugging
34-VLAN-VPN
35-HWping
36-IPv6 Management
38-Smart Link-Monitor
Link