File Attribute Configuration; Introduction To File Attributes - H3C S3100-52P Operation Manual

Operation Manual – File System Management
H3C S3100-52P Ethernet Switch
7
7239 KB total (3585 KB free)
(*) -with main attribute
(*b) -with both main and backup attribute
<Sysname> dir unit1>flash:/test/
Directory of unit1>flash:/test/
1
2
7239 KB total (3585 KB free)
(*) -with main attribute
(*b) -with both main and backup attribute

1.2 File Attribute Configuration

1.2.1 Introduction to File Attributes

The following three startup files support file attribute configuration:
App files: An app file is an executable file, with .bin as the extension.
Configuration files: A configuration file is used to store and restore configuration,
with .cfg as the extension.
Web files: A Web file is used for Web-based network management, with .web as
the extension.
The app files, configuration files, and Web files support three kinds of attributes: main,
backup and none, as described in
Table 1-6 Descriptions on file attributes
Attribute name
main
backup
drw- - Apr 04 2000 23:04:21
(b) -with backup attribute
-rw- 1235 Apr 05 2000 01:51:34
-rw- 1235 Apr 05 2000 01:56:44
(b) -with backup attribute
Description
Identifies main
startup files. The
main startup file is
preferred for a switch
to start up.
Identifies backup
startup files. The
backup startup file is
used after a switch
fails to start up using
the main startup file.
Chapter 1 File System Management Configuration
Table 1-6.
Feature
In the Flash memory,
there can be only one
app file, one
configuration file and
one Web file with the
main attribute.
In the Flash memory,
there can be only one
app file, one
configuration file and
one Web file with the
backup attribute.
1-6
test
test.cfg
1.cfg
Identifier
(*)
(b)