Configuring The Attributes Of Data To Be Sent To Radius Servers - H3C S3100-52P Operation Manual

Operation Manual – AAA
H3C S3100-52P Ethernet switch
Follow these steps to set the status of RADIUS servers:
Enter system view
Create a RADIUS scheme
and enter its view
Set the status of the
primary RADIUS
authentication/authorizati
on server
Set the status of the
primary RADIUS
accounting server
Set the status of the
secondary RADIUS
authentication/authorizati
on server
Set the status of the
secondary RADIUS
accounting server

2.2.8 Configuring the Attributes of Data to be Sent to RADIUS Servers

Follow these steps to configure the attributes of data to be sent to RADIUS servers:
Enter system view
Create a RADIUS scheme
and enter its view
Set the format of the
usernames to be sent to
RADIUS server
To do...
system-view
radius scheme
radius-scheme-name
state primary
authentication { block |
active }
state primary
accounting { block |
active }
state secondary
authentication { block |
active }
state secondary
accounting { block |
active }
To do...
system-view
radius scheme
radius-scheme-name
user-name-format
{ with-domain |
without-domain }
Use the command...
Use the command...
2-19
Chapter 2 AAA Configuration
Remarks
—
Required
By default, a RADIUS
scheme named "system"
has already been created
in the system.
Optional
By default, the RADIUS
servers specified with IP
addresses in the RADIUS
scheme are all in the
active state.
Remarks
—
Required
By default, a RADIUS
scheme named "system"
has already been created
in the system.
Optional
By default, the usernames
sent from the switch to
RADIUS server carry ISP
domain names.