Information Center Configuration Examples; Log Output To A Unix Log Host - H3C S3100-52P Operation Manual

Operation Manual – Information Center
H3C S3100-52P Ethernet Switch
Display the operation
status of information
center, the configuration
of information channels,
the format of time stamp
Display the status of log
buffer and the information
recorded in the log buffer
Display the summary
information recorded in
the log buffer
Display the status of trap
buffer and the information
recorded in the trap buffer
Clear information
recorded in the log buffer
Clear information
recorded in the trap buffer

1.4 Information Center Configuration Examples

1.4.1 Log Output to a UNIX Log Host

I. Network requirements
The switch sends the following log information to the Unix log host whose IP address is
202.38.1.10: the log information of the two modules ARP and IP, with severity higher
than "informational".
II. Network diagram
Figure 1-1 Network diagram for log output to a Unix log host
III. Configuration procedure
1) Configure the switch:
# Enable the information center.
<Switch> system-view
To do...
display info-center [ unit
unit-id ]
display logbuffer [ unit unit-id ]
[ level severity | size buffersize ]*
[ | { begin | exclude | include }
regular-expression ]
display logbuffer summary
[ level severity ]
display trapbuffer [ unit unit-id ]
[ size buffersize ]
reset logbuffer [ unit unit-id ]
reset trapbuffer [ unit unit-id ]
Use the command...
1-17
Chapter 1 Information Center
Remarks
Available in user
view