Configuration Example - H3C S3100-52P Operation Manual

Operation Manual – Information Center
H3C S3100-52P Ethernet Switch
II. Network diagram
Figure 1-3 Network diagram for log output to the console
III. Configuration procedure
# Enable the information center.
<Switch> system-view
[Switch] info-center enable
# Disable the function of outputting information to the console channels.
[Switch] undo info-center source default channel console
# Enable log information output to the console. Permit ARP and IP modules to output
log information with severity level higher than informational to the console.
[Switch] info-center console channel console
[Switch] info-center source arp channel console log level informational debug
state off trap state off
[Switch] info-center source ip channel console log level informational debug
state off trap state off
# Enable terminal display.
<Switch> terminal monitor
<Switch> terminal logging

1.4.4 Configuration Example

I. Network requirements
The switch is in the time zone of GMT+ 08:00:00.
The time stamp format of output log information is date.
UTC time zone will be added to the output information of the information center.
II. Network diagram
Figure 1-4 Network diagram
1-21
Chapter 1 Information Center