H3C S3100-52P Operation Manual page 866

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Configure the destination
IP address
Configure dns-server
Configure the source IP
address
Configure the source port
Configure the number of
probes per test
Configure the maximum
number of history records
that can be saved
Configure the automatic
test interval
Configure the probe
timeout time
Configure the type of
service
Configure the type of
HTTP operation
To do...
destination-ip ip-address
dns-server ip-address
source-ip ip-address
source-port port-number
count times
history-records number
frequency interval
timeout time
tos value
http-operation { get |
post }
Use the command...
1-10
Chapter 1 HWPing Configuration
Remarks
Required
You can configure an IP
address or a host name.
By default, no destination
address is configured.
Required when you use
the destination-ip
command to configure the
destination address as the
host name.
By default, no IP address
of the DNS server is
configured.
Optional
By default, no source IP
address is configured.
Optional
By default, no source port
is configured.
Optional
By default, each test
makes one probe.
Optional
By default, the maximum
number is 50.
Optional
By default, the automatic
test interval is zero
seconds, indicating no
automatic test will be
made.
Optional
By default, a probe times
out in three seconds.
Optional
By default, the service
type is zero.
Optional
By default, the type of
HTTP operation is get,
that is, the HTTP
operation will get data
from the HTTP server.