H3C S3100-52P Operation Manual page 906

Operation Manual – IPv6 Management
H3C S3100-52P Ethernet Switch
Configure
an IPv6
global
unicast
address or
site-local
address
Configure
an IPv6
link-local
address
To do...
Manually ipv6 address { ipv6-address
assign an IPv6 prefix-length |
address ipv6-address/prefix-length }
Adopt the
ipv6 address
EUI-64 format
ipv6-address/prefix-length
to form an IPv6
eui-64
address
Automatically
generate a ipv6 address auto
link-local link-local
address
Manually
assign a
ipv6 address ipv6-address
link-local
link-local
address for an
interface.
Use the command...
1-12
Chapter 1 IPv6 Configuration
Remarks
Use either
command
By default, no
site-local address
or global unicast
address is
configured for an
interface.
Note that the prefix
specified by the
prefix-length
argument in an
EUI-64 address
cannot exceed 64
bits in length.
Optional
By default, after an
IPv6 site-local
address or global
unicast address is
configured for an
interface, a
link-local address
will be generated
automatically.