Configuring An Ssh Client Assumed By An Ssh2-Capable Switch - H3C S3100-52P Operation Manual

Operation Manual – SSH
H3C S3100-52P Ethernet Switch
From the category on the left of the window, select Connection/SSH/Auth. The
following window appears.
Figure 1-9 SSH client configuration interface 3
Click Browse... to bring up the file selection window, navigate to the private key file and
click Open. If the connection is normal, a user will be prompted for a username. Once
passing the authentication, the user can log in to the server.

1.4.3 Configuring an SSH Client Assumed by an SSH2-Capable Switch

Table 1-14 Complete the following tasks to configure an SSH client that is assumed by
an SSH2-capable switch:
Configuring the SSH client for publickey
authentication
Configuring whether first-time
authentication is supported
Specifying a source IP address/interface
for the SSH client
Task
1-22
Chapter 1 SSH Configuration
Remarks
Not necessary
authentication mode is password.
Required when the authentication
mode is publickey.
Optional
Optional
when the