Console Port Login Configuration With Authentication Mode Being Scheme - H3C S3100-52P Operation Manual

Operation Manual – Login
H3C S3100-52P Ethernet switch
2.6 Console Port Login Configuration with Authentication
Mode Being Scheme
2.6.1 Configuration Procedure
Follow these steps to configure console port login with the authentication mode being
scheme:
Enter system view
Configur
e the
authentic
ation
mode
Create a local user (Enter
local user view.)
Set the authentication
password for the local
user
Specify the service type
for AUX users
Quit to system view
Enter AUX user interface
view
To do... Use the command...
system-view
Enter the
default ISP domain domain-name
domain view
scheme { local | none |
Specify the radius-scheme
AAA scheme
radius-scheme-name
to be applied
[ local ] |
to the hwtacacs-scheme
domain hwtacacs-scheme-name
[ local ] }
Quit to
quit
system view
local-user user-name
password { simple |
cipher } password
service-type terminal
[ level level ]
quit
user-interface aux 0
Chapter 2 Logging In Through the Console Port
2-13
Remarks
—
Optional
By default, the local AAA
scheme is applied.
If you specify to apply the
local AAA scheme, you
need to perform the
configuration concerning
local user as well.
If you specify to apply an
existing scheme by
providing the
radius-scheme-name
argument, you need to
perform the following
configuration as well:
Perform AAA&RADIUS
configuration on the switch.
(Refer to the AAA part for
more.)
Configure the user name
and password accordingly
on the AAA server. (Refer to
the user manual of AAA
server.)
Required
No local user exists by
default.
Required
Required
—
—