Arp Table - H3C S3100-52P Operation Manual

Operation Manual – ARP
H3C S3100-52P Ethernet Switch
Table 1-2 Description on the values of the hardware type field
1
2
3
4
5
6
7

1.1.3 ARP Table

In an Ethernet, the MAC addresses of two hosts must be available for the two hosts to
communicate with each other. Each host in an Ethernet maintains an ARP table, where
the latest used IP address-to-MAC address mapping entries are stored. An S3100-52P
Ethernet switch provides the display arp command to display the information about
ARP mapping entries.
ARP entries in an S3100-52P Ethernet switch can either be static entries or dynamic
entries, as described in
Table 1-3 ARP entries
ARP entry
Static ARP entry
Dynamic ARP entry
Value
Table 1-3.
Generation Method
Manually configured
Dynamically generated
1-3
Chapter 1 ARP Configuration
Description
Ethernet
Experimental Ethernet
X.25
Proteon ProNET (Token Ring)
Chaos
IEEE802.X
ARC network
Maintenance Mode
Manual maintenance
ARP entries of this type age
with time. The aging period is
set by the ARP aging timer.