H3C S3100-52P Operation Manual page 699

Operation Manual – SSH
H3C S3100-52P Ethernet Switch
Figure 1-7 SSH client configuration interface 1
In the Host Name (or IP address) text box, enter the IP address of the server. Note
that there must be a route available between the IP address of the server and the client.
III. Selecting a protocol for remote connection
As shown in
IV. Selecting an SSH version
From the category on the left pane of the window, select SSH under Connection. The
window as shown in
Figure 1-7, select SSH under Protocol.
Figure 1-8 appears.
1-20
Chapter 1 SSH Configuration