H3C S3100-52P Operation Manual page 432

Operation Manual – AAA
H3C S3100-52P Ethernet switch
Set the units of data flows
to RADIUS servers
Set the MAC address
format of the
Calling-Station-Id (Type
31) field in RADIUS
packets
Set the source IP address
of outgoing RADIUS
messages
To do...
data-flow-format data
{ byte | giga-byte |
kilo-byte | mega-byte }
packet { giga-packet |
kilo-packet | mega-
packet | one-packet }
calling-station-id mode
{ mode1 | mode2 }
{ lowercase |
uppercase }
RADIUS scheme view
nas-ip ip-address
System view
radius nas-ip ip-address
Use the command...
2-20
Chapter 2 AAA Configuration
Remarks
Optional
By default, in a RADIUS
scheme, the data unit and
packet unit for outgoing
RADIUS flows are byte
and one-packet
respectively.
Optional
By default, the MAC
address format is
XXXX-XXXX-XXXX, in
lowercase.
Optional
By default, no source IP
address is set; and the IP
address of the
corresponding outbound
interface is used as the
source IP address.