H3C S3100-52P Operation Manual page 703

Operation Manual – SSH
H3C S3100-52P Ethernet Switch
Table 1-16 Follow these steps to disable first-time authentication support:
Enter system view
Disable first-time
authentication support
Configure server public
key
Specify the host key name
of the server
III. Specifying a source IP address/interface for the SSH client
This configuration task allows you to specify a source IP address or interface for the
client to use to access the SSH server. This feature improves the service
manageability.
Table 1-17 Follow these steps to specify a source IP address/interface for the SSH
client:
To do...
Enter system view
Specify a source IP
address for the SSH
client
Specify a source
interface for the SSH
client
IV. Establishing the connection between the SSH client and server
The client's method of establishing an SSH connection to the SSH server varies with
authentication types.
To do...
system-view
undo ssh client
first-time
Refer to
Public Key of a Client on
the Server
ssh client { server-ip |
server-name } assign
publickey keyname
Use the command...
system-view
ssh2 source-ip
ip-address
ssh2 source-interface
interface-type
interface-number
Use the command...
Configuring the
1-24
Chapter 1 SSH Configuration
Remarks
—
Required
By default, the client is
enabled to run first-time
authentication.
Required
The method of configuring
server public key on the
client is similar to that of
configuring client public
key on the server.
Required
Remarks
—
Optional
By default, the system
determines a source IP
address.
Optional
By default, the system
determines a source interface.