Configuring File Attributes - H3C S3100-52P Operation Manual

Operation Manual – File System Management
H3C S3100-52P Ethernet Switch

1.2.3 Configuring File Attributes

You can configure and view the main attribute or backup attribute of the startup file
used for the next startup of a switch, and change the main or backup attribute of the file.
Perform the configuration listed in
be executed in any view.
Table 1-7 Configure file attributes
Configure the app file with
the main attribute for the
next startup
Configure the app file with
the backup attribute for
the next startup
Configure the Web file
and its attribute
Switch the file attributes
between main and backup
Specify to enable user to
use the customized
password to enter the
BOOT menu
Display the information
about the app file used as
the startup file
Display information about
the Web file used by the
device
To do...
boot boot-loader file-url
boot boot-loader
backup-attribute file-url
boot web-package
webfile { backup | main }
boot attribute-switch
{ all | app | configuration
| web }
startup bootrom-access
enable
display boot-loader
[ unit unit-id ]
display web package
Chapter 1 File System Management Configuration
Table 1-7 in user view. The display commands can
Use the command...
1-8
Remarks
Optional
Optional
Optional
Optional
Optional
By default, the user is
enabled to use the
customized password to
enter the BOOT menu.
Optional
Available in any view