H3C S3100-52P Operation Manual page 708

Operation Manual – SSH
H3C S3100-52P Ethernet Switch
Configure the SSH client
# Configure an IP address (192.168.0.2 in this case) for the SSH client. This IP address
and that of the VLAN interface on the switch must be in the same network segment.
# Configure the SSH client software to establish a connection to the SSH server.
Take SSH client software Putty (version 0.58) as an example:
1) Run PuTTY.exe to enter the following configuration interface.
Figure 1-11 SSH client configuration interface
In the Host Name (or IP address) text box, enter the IP address of the SSH server.
2) From the category on the left pane of the window, select SSH under Connection.
The window as shown in Figure 1-12 appears.
1-29
Chapter 1 SSH Configuration