H3C S3100-52P Operation Manual page 457

Operation Manual – Web Authentication
H3C S3100-52P Ethernet switch
Enter system view
Set the IP address and
port number of the Web
authentication server
Enable Web
authentication globally
Enable Web
authentication on a port
Set a free IP address
range that can be
accessed by users before
Web authentication
Set an authentication-free
user
Forcibly log out the
specified or all users.
Set the idle user checking
interval for Web
authentication
Set the maximum number
of online Web
authentication users on a
port
To do...
system-view
web-authentication
web-server ip ip-address
[ port port-number ]
web-authentication
enable
interface interface-type
interface-number
web-authentication
select method { shared |
designated }
quit
web-authentication
free-ip ip-address
{ mask-length | mask }
web-authentication
free-user ip ip-address
mac mac-address
web-authentication cut
connection { all | mac
mac-address |
user-name user-name |
interface interface-type
interface-number }
web-authentication
timer idle-cut timer
web-authentication
max-connection number
Chapter 1 Web Authentication Configuration
Use the command...
1-2
Remarks
—
Required
If no port number is
specified, port 80 will be
used.
No Web authentication
server is set by default.
Required
Disabled globally by
default
Required
Disabled on port by
default
Optional
No such address range by
default
Optional
No such user by default
Optional
Optional
900 seconds by default
Optional
128 users by default