H3C S3100-52P Operation Manual page 388

Operation Manual – 802.1x and System Guard
H3C S3100-52P Ethernet switch
# Configure to send the user name to the RADIUS server with the domain name
truncated.
[Sysname-radius-radius1] user-name-format without-domain
[Sysname-radius-radius1] quit
# Create the domain named "aabbcc.net" and enter its view.
[Sysname] domain aabbcc.net
# Specify to adopt radius1 as the RADIUS scheme of the user domain. If RADIUS
server is invalid, specify to adopt the local authentication scheme.
[Sysname-isp-aabbcc.net] scheme radius-scheme radius1 local
# Specify the maximum number of users the user domain can accommodate to 30.
[Sysname-isp-aabbcc.net] access-limit enable 30
# Enable the idle disconnecting function and set the related parameters.
[Sysname-isp-aabbcc.net] idle-cut enable 20 2000
[Sysname-isp-aabbcc.net] quit
# Set the default user domain to aabbcc.net.
[Sysname] domain default enable aabbcc.net
# Create a local access user account.
[Sysname] local-user localuser
[Sysname-luser-localuser] service-type lan-access
[Sysname-luser-localuser] password simple localpass
1-27
Chapter 1 802.1x Configuration