Sftp Configuration - H3C S3100-52P Operation Manual

Operation Manual – FTP-SFTP-TFTP
H3C S3100-52P Ethernet Switch
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):admin
331 Password required for admin.
Password:
230 User logged in.
[ftp]
# Enter the authorized directory on the FTP server.
[ftp] cd switch
# Execute the put command to upload the configuration file named config.cfg to the
FTP server.
[ftp] put config.cfg
# Execute the get command to download the file named switch.bin to the Flash
memory of the switch.
[ftp] get switch.bin
# Execute the quit command to terminate the FTP connection and return to user view.
[ftp] quit
<Sysname>
# After downloading the file, use the boot boot-loader command to specify the
downloaded file (switch.bin) to be the application for next startup, and then restart the
switch. Thus the switch application is upgraded.
<Sysname> boot boot-loader switch.bin
<Sysname> reboot
Note:
For information about the boot boot-loader command and how to specify the startup
file for a switch, refer to the System Maintenance and Debugging module of this
manual.

1.3 SFTP Configuration

Complete the following tasks to configure SFTP:
Chapter 1 FTP and SFTP Configuration
1-16