H3C S3100-52P Operation Manual page 873

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Configure the automatic
test interval
Configure the probe
timeout time
Configure the service type
Start the test
Display test results
9) Configuring DNS test on HWPing client
Follow these steps to configure DNS test on HWPing client:
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
Configure the test type
Configure the source IP
address
Configure the number of
probes per test
Configure the maximum
number of history records
that can be saved
To do...
frequency interval
timeout time
tos value
test-enable
display hwping results
[ admin-name
operation-tag ]
To do...
system-view
hwping-agent enable
hwping
administrator-name
operation- tag
test-type dns
source-ip ip-address
count times
history-records number
Use the command...
Use the command...
1-17
Chapter 1 HWPing Configuration
Remarks
Optional
By default, the automatic
test interval is zero
seconds, indicating no
automatic test will be
made.
Optional
By default, a probe times
out in three seconds.
Optional
By default, the service
type is zero.
Required
Required
The display command
can be executed in any
view.
Remarks
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group
is configured.
Required
By default, the test type is
ICMP.
Optional
By default, no source IP
address is specified.
Optional
By default, one probe is
made per test.
Optional
By default, the maximum
number is 50.