Displaying And Maintaining Ipv6 - H3C S3100-52P Operation Manual

Operation Manual – IPv6 Management
H3C S3100-52P Ethernet Switch
Configure the domain
suffix.
Note:
The dns resolve and dns domain commands are the same as those of IPv4 DNS. For
details about the commands, refer to DNS Operation in this manual.

1.2.8 Displaying and Maintaining IPv6

Display DNS domain name
suffix information
Display IPv6 dynamic
domain name cache
information.
Display DNS server
information
Display the FIB entries
Display the mapping
between host name and
IPv6 address
Display the brief IPv6
information of an interface
Display neighbor
information
Display the total number of
neighbor entries satisfying
the specified conditions
Display information about
the routing table
Display information related
to a specified socket
To do...
dns domain
domain-name
To do...
display dns domain [ dynamic ]
display dns ipv6 dynamic-host
display dns server [ dynamic ]
display ipv6 fib
display ipv6 host
display ipv6 interface [ interface-type
interface-number | brief ]
display ipv6 neighbors [ ipv6-address |
all | dynamic | interface interface-type
interface-number | static | vlan vlan-id ]
[ | { begin | exclude | include }
regular-expression ]
display ipv6 neighbors { all | dynamic |
static | interface interface-type
interface-number | vlan vlan-id } count
display ipv6 route-table [ verbose ]
display ipv6 socket [ socktype
socket-type ] [ task-id socket-id ]
Use the command...
Use the command...
1-19
Chapter 1 IPv6 Configuration
Remarks
Required
By default, no domain
name suffix is configured,
that is, the domain name
is resolved according to
the input information.
Remarks
Available
in any
view