H3C S3100-52P Operation Manual page 56

Operation Manual – Login
H3C S3100-52P Ethernet switch
Configure to authenticate
users locally or remotely
Configure
the
console
port
Configure the command
level available to users
logging in to the user
interface
Make terminal services
available to the user
interface
Set the maximum
number of lines the
screen can contain
To do... Use the command...
authentication-mode
scheme [ command-
authorization ]
Set the
speed speed-value
baud rate
Set the parity { even | none |
check mode odd }
Set the stop
stopbits { 1 | 1.5 | 2 }
bits
Set the data
databits { 7 | 8 }
bits
user privilege level
level
shell
screen-length
screen-length
Chapter 2 Logging In Through the Console Port
2-14
Remarks
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
By default, users logging in
through the console port
(AUX user interface) are not
authenticated.
Optional
The default baud rate of the
AUX port (also the console
port) is 9,600 bps.
Optional
By default, the check mode
of a console port is set to
none, that is, no check bit.
Optional
The default stop bits of a
console port is 1.
Optional
The default data bits of a
console port is 8.
Optional
By default, commands of
level 3 are available to users
logging in to the AUX user
interface.
Optional
By default, terminal services
are available in all user
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0 command
to disable the function to
display information in
pages.