H3C S3100-52P Operation Manual page 865

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Configure the probe
timeout time
Configure the type of
service
Configure the type of FTP
operation
Configure an FTP login
username
Configure an FTP login
password
Configure a file name for
the FTP operation
Start the test
Display test results
4) Configuring HTTP test on HWPing client
Follow these steps to configure HTTP test on HWPing client:
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
Configure the test type
To do...
timeout time
tos value
ftp-operation { get | put }
username name
password password
filename file-name
test-enable
display hwping results
[ admin-name
operation-tag ]
To do...
system-view
hwping-agent enable
hwping
administrator-name
operation-tag
test-type http
Use the command...
Use the command...
1-9
Chapter 1 HWPing Configuration
Remarks
Optional
By default, a probe times
out in three seconds.
Optional
By default, the service
type is zero.
Optional
By default, the type of
FTP operation is get, that
is, the FTP operation will
get a file from the FTP
server.
Required
By default, neither
username nor password
is configured.
Required
By default, no file name is
configured for the FTP
operation
Required
Required
You can execute the
command in any view.
Remarks
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group
is configured.
Required
By default, the test type is
ICMP.