Ipv6 Configuration Example; Ipv6 Unicast Address Configuration - H3C S3100-52P Operation Manual

Operation Manual – IPv6 Management
H3C S3100-52P Ethernet Switch
Display the statistics of
IPv6 packets and IPv6
ICMP packets
Display the statistics of
IPv6 TCP packets
Display the IPv6 TCP
connection status
Display the statistics of
IPv6 UDP packets
Clear IPv6 dynamic
domain name cache
information
Clear IPv6 neighbor
information
Clear the statistics of IPv6
packets
Clear the statistics of all
IPv6 TCP packets
Clear the statistics of all
IPv6 UDP packets
Note:
The display dns domain and display dns server commands are the same as those
of IPv4 DNS. For details about the commands, refer to DNS Operation in this manual.

1.3 IPv6 Configuration Example

1.3.1 IPv6 Unicast Address Configuration

I. Network requirements
Two switches are directly connected through two Ethernet ports. The Ethernet ports
belong to VLAN 2. Different types of IPv6 addresses are configured for the interface
VLAN-interface 2 on each switch to verify the connectivity between the two switches.
The IPv6 prefix in the EUI-64 format is 2001::/64, the global unicast address of Switch A
is 3001::1/64, and the global unicast address of Switch B is 3001::2/64.
To do...
display ipv6 statistics
display tcp ipv6 statistics
display tcp ipv6 status
display udp ipv6 statistics
reset dns ipv6 dynamic-host
reset ipv6 neighbors [ all | dynamic |
interface interface-type
interface-number | static ]
reset ipv6 statistics
reset tcp ipv6 statistics
reset udp ipv6 statistics
Use the command...
1-20
Chapter 1 IPv6 Configuration
Remarks
Available
in user
view