Vlan Mapping Configuration Example - H3C S3100-52P Operation Manual

Operation Manual – QoS-QoS Profile
H3C S3100-52P Ethernet Switch
<Sysname> system-view
[Sysname] acl number 3000
# Define ACL rules for identifying packets based on destination IP addresses.
[Sysname-acl-adv-3000] rule 0 permit ip destination 192.168.0.1 0
[Sysname-acl-adv-3000] rule 1 permit ip destination 192.168.0.2 0
[Sysname-acl-adv-3000] rule 2 permit ip destination 192.168.0.3 0
[Sysname-acl-adv-3000] quit
2) Configure priority marking
# Mark priority for packets received through Ethernet 1/0/2 and matching ACL 3000.
[Sysname] interface Ethernet1/0/2
[Sysname-Ethernet1/0/2]
local-precedence 4
[Sysname-Ethernet1/0/2]
local-precedence 3
[Sysname-Ethernet1/0/2]
local-precedence 2
[Sysname-Ethernet1/0/2] quit
3) Configure queue scheduling
# Apply SP queue scheduling algorithm.
[Sysname] queue-scheduler strict-priority

1.6.3 VLAN Mapping Configuration Example

I. Network requirements
Two customer networks are connected to the public network through Switch A and
Switch B. Configure the VLAN mapping function on the switches to enable the hosts on
the two customer networks to communicate through public network VLANs.
Switch A provides network access for terminal devices in VLAN 100 and VLAN
200 through Ethernet 1/0/11 and Ethernet 1/0/12. On the other side of the public
network, Switch B provides network access for servers in VLAN 100 and VLAN
200 through Ethernet 1/0/15 and Ethernet 1/0/16.
Switch A provides access to the public network through Ethernet 1/0/10 and
Switch B provides access to the public network through Ethernet 1/0/17.
Configure the switches to have packets of VLAN 100 and packets of VLAN 200
transmitted in VLAN 500 and VLAN 600 across the public network.
traffic-priority inbound
traffic-priority inbound
traffic-priority inbound
1-35
Chapter 1 QoS Configuration
ip-group 3000 rule
ip-group 3000 rule
ip-group 3000 rule
0
1
2