H3C S3100-52P Operation Manual page 863

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Configure the type of
service (ToS)
Start the test
Display test results
2) Configuring DHCP test on HWPing client
Follow these steps to configure DHCP test on HWPing client:
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
Configure the test type
Configure the source
interface
Configure the number of
probes per test
Configure the maximum
number of history records
that can be saved
Configure the probe
timeout time
Start the test
To do...
tos value
test-enable
display hwping results
[ admin-name
operation-tag ]
To do...
system-view
hwping-agent enable
hwping
administrator-name
operation-tag
test-type dhcp
source-interface
interface-type
interface-number
count times
history-records number
timeout time
test-enable
Use the command...
Use the command...
1-7
Chapter 1 HWPing Configuration
Remarks
Optional
By default, the service
type is zero.
Required
Required
Available in any view.
Remarks
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group
is configured.
Required
By default, the test type is
ICMP.
Required
You can only configure a
VLAN interface as the
source interface.
By default, no source
interface is configured.
Optional
By default, each test
makes one probe.
Optional
By default, the maximum
number is 50.
Optional
By default, a probe times
out in three seconds.
Required