H3C S3100-52P Operation Manual page 754

Operation Manual – FTP-SFTP-TFTP
H3C S3100-52P Ethernet Switch
server, and download the configuration file named config.cfg from the FTP server. The
following takes the command line window tool provided by Windows as an example:
# Enter the command line window and switch to the directory where the file switch.bin
is located. In this example it is in the root directory of C:\.
C:\>
# Access the Ethernet switch through FTP. Input the username switch and password
hello to log in and enter FTP view.
C:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User (1.1.1.1:(none)): switch
331 Password required for switch.
Password:
230 User logged in.
ftp>
# Upload file switch.bin.
ftp> put switch.bin
200 Port command okay.
150 Opening ASCII mode data connection for switch.bin.
226 Transfer complete.
ftp: 75980 bytes received in 5.55 seconds 13.70Kbytes/sec.
# Download file config.cfg.
ftp> get config.cfg
200 Port command okay.
150 Opening ASCII mode data connection for config.cfg.
226 Transfer complete.
ftp: 3980 bytes received in 8.277 seconds 0.48Kbytes/sec.
This example uses the command line window tool provided by Windows. When you log
in to the FTP server through another FTP client, refer to the corresponding instructions
for operation description.
Chapter 1 FTP and SFTP Configuration
1-12