H3C S3100-52P Operation Manual page 864

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Display test results
3) Configuring FTP test on HWPing client
Follow these steps to configure FTP test on HWPing client:
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
Configure the test type
Configure the destination
IP address
Configure the source IP
address
Configure the source port
Configure the number of
probes per test
Configure the maximum
number of history records
that can be saved
Configure the automatic
test interval
To do...
display hwping results
[ admin-name
operation-tag ]
To do...
system-view
hwping-agent enable
hwping
administrator-name
operation-tag
test-type ftp
destination-ip ip-address
source-ip ip-address
source-port port-number
count times
history-records number
frequency interval
Use the command...
Use the command...
1-8
Chapter 1 HWPing Configuration
Remarks
Required
You can execute the
command in any view.
Remarks
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group
is configured.
Required
By default, the test type is
ICMP.
Required
By default, no destination
address is configured.
Required
By default, no source IP
address is configured.
Optional
By default, no source port
is configured.
Optional
By default, each test
makes one probe.
Optional
By default, the maximum
number is 50.
Optional
By default, the automatic
test interval is zero
seconds, indicating no
automatic test will be
made.