H3C S3100-52P Operation Manual page 870

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Display test results
7) Configuring TCP test on HWPing client
Follow these steps to configure TCP test on HWPing client:
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
Configure the test type
Configure the destination
address
Configure the destination
port
To do...
display hwping results
[ admin-name
operation-tag ]
To do...
system-view
hwping-agent enable
hwping
administrator-name
operation- tag
test-type { tcpprivate |
tcppublic }
destination-ip ip-address
destination-port
port-number
Use the command...
Use the command...
1-14
Chapter 1 HWPing Configuration
Remarks
Required
You can execute the
command in any view.
Remarks
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group
is configured.
Required
By default, the test type is
ICMP.
Required
This IP address and the
one configured on the
HWPing server for
listening services must be
the same.
By default, no destination
address is configured.
Required in a Tcpprivate
test
A Tcppublic test is a TCP
connection test on port 7.
Use the hwping-server
tcpconnect ip-address 7
command on the server to
configure the listening
service port; otherwise the
test will fail. No port
number needs to be
configured on the client;
any destination port
number configured on the
client will not take effect.
By default, no destination
port number is configured.