H3C S3100-52P Operation Manual page 627

Operation Manual – Stack-Cluster
H3C S3100-52P Ethernet Switch
Display the detailed
information about a single
device
Display the topology of
the current cluster
Display the information
about the base topology
of the cluster
Display the information
about all the devices in
the base cluster topology
IV. Configuring cluster device blacklist
Perform the following configuration on the management device.
Follow these steps to configure the cluster device blacklist:
Enter system view
Enter cluster view
Add the MAC address of a
specified device to the
cluster blacklist
Delete the specified MAC
address from the cluster
blacklist
Delete a device from the
cluster add this device to
the cluster blacklist
Displays the information
about the devices in the
cluster blacklist
To do...
display ntdp single-device
mac-address mac-address
display cluster current-topology
[ mac-address mac-address1
[ to-mac-address mac-address2 ] |
member-id member-id1
[ to-member-id member-id2 ] ]
display cluster base-topology
[ mac-address mac-address |
member member-id ]
display cluster base-members
To do...
system-view
cluster
black-list add-mac
mac-address
black-list delete-mac
mac-address
delete-member
member-id
[ to-black-list ]
display cluster
black-list
Use the command...
Use the command...
2-21
Chapter 2 Cluster
Remarks
Optional
These
commands can
be executed in
any view.
Remarks
—
—
Optional
By default, the cluster
blacklist is empty.
Optional
Optional
Optional
This command can be
executed in any view.