H3C S3100-52P Operation Manual page 44

Operation Manual – Login
H3C S3100-52P Ethernet switch
Figure 2-1 Diagram for connecting to the console port of a switch
2) If you use a PC to connect to the console port, launch a terminal emulation utility
(such as Terminal in Windows 3.X or HyperTerminal in Windows 9X/Windows
2000/Windows XP. The following assumes that you are running Windows XP) and
perform the configuration shown in
connection to be created. Normally, both sides (that is, the serial port of the PC
and the console port of the switch) are configured as those listed in
Figure 2-2 Create a connection
Figure 2-3 Specify the port used to establish the connection
Chapter 2 Logging In Through the Console Port
Figure 2-2
2-2
through Figure 2-4
Table
for the
2-1.