H3C S3100-52P Operation Manual page 66

Operation Manual – Login
H3C S3100-52P Ethernet switch
To do...
Configure the
command level
available to users
logging in to the user
interface
Configure the protocol
to be supported by the
user interface
Set the commands to
be executed
automatically after a
user login to the user
interface successfully
Make terminal
services available
Set the maximum
number of lines the
screen can contain
Set the history
command buffer size
Set the timeout time of
the user interface
When the authentication mode is password, the command level available to users
logging in to the user interface is determined by the user privilege level command.
Use the command...
user privilege level
level
protocol inbound { all |
ssh | telnet }
auto-execute
command text
shell
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
3-7
Chapter 3 Logging In Through Telnet
Remarks
Optional
By default, commands of level
0 are available to users logging
in to VTY user interface.
Optional
By default, both Telnet protocol
and SSH protocol are
supported.
Optional
By default, no command is
executed automatically after a
user logs into the user
interface.
Optional
By default, terminal services
are available in all user
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0 command to
disable the function to display
information in pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a
user interface is terminated if
no operation is performed in
the user interface within 10
minutes.
You can use the idle-timeout 0
command to disable the
timeout function.