H3C S3100-52P Operation Manual page 49

Operation Manual – Login
H3C S3100-52P Ethernet switch
Configure not to
authenticate users
Configure
the
console
port
Configure the command
level available to users
logging in to the user
interface
Enable terminal services
Set the maximum
number of lines the
screen can contain
Set the history command
buffer size
To do... Use the command...
authentication-mode
none
Set the baud
speed speed-value
rate
Set the parity { even | none |
check mode odd }
Set the stop
stopbits { 1 | 1.5 | 2 }
bits
Set the data
databits { 7 | 8 }
bits
user privilege level
level
shell
screen-length
screen-length
history-command
max-size value
Chapter 2 Logging In Through the Console Port
Required
By default, users logging in
through the console port (AUX
user interface) are not
authenticated.
Optional
The default baud rate of a
console port is 9,600 bps.
Optional
By default, the check mode of
a console port is none, that is,
no check is performed.
Optional
The stop bits of a console port
is 1.
Optional
The default data bits of a
console port is 8.
Optional
By default, commands of level
3 are available to users
logging in to the AUX user
interface, and commands of
level 0 are available to users
logging in to the VTY user
interface.
Optional
By default, terminal services
are available in all user
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0 command to
disable the function to display
information in pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
2-7
Remarks