Configuring Real-Time Monitoring Of The Running Status Of The System; Specifying The App To Be Used At Reboot; Upgrading The Boot Rom - H3C S3100-52P Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch

4.2.4 Configuring Real-time Monitoring of the Running Status of the System

This function enables you to dynamically record the system running status, such as
CPU, thus facilitating analysis and solution of the problems of the device.
Follow these steps to configure real-time monitoring of the running status of the system:
Enter system view
Enable real-time
monitoring of the running
status of the system
Caution:
Enabling of this function consumes some amounts of CPU resources. Therefore, if your
network has a high CPU usage requirement, you can disable this function to release
your CPU resources.

4.2.5 Specifying the APP to be Used at Reboot

APP is the host software of the switch. If multiple APPs exist in the Flash memory, you
can use the command here to specify the one that will be used when the switch
reboots.
Use the following command to specify the APP to be used at reboot:
To do...
Specify the APP to
be used at reboot

4.2.6 Upgrading the Boot ROM

You can use the Boot ROM program saved in the Flash memory of the switch to
upgrade the running Boot ROM. With this command, a remote user can conveniently
upgrade the Boot ROM by uploading the Boot ROM to the switch through FTP and
running this command. The Boot ROM can be used when the switch restarts.
Use the following command to upgrade the Boot ROM:
To do...
system-view
system-monitor enable
boot boot-loader [ backup-attribute ]
{ file-url | device-name }
Use the command...
Use the command...
4-3
Chapter 4 Device Management
Remarks
—
Optional
Enabled by default.
Remarks
Required