H3C S3100-52P Operation Manual page 751

Operation Manual – FTP-SFTP-TFTP
H3C S3100-52P Ethernet Switch
Query a specified file on
the FTP server
Download a remote file
from the FTP server
Upload a local file to the
remote FTP server
Rename a file on the
remote server
Log in with the specified
user name and password
Connect to a remote FTP
server
Terminate the current FTP
connection without exiting
FTP client view
Terminate the current FTP
connection and return to
user view
Display the online help
about a specified
command concerning
FTP
Enable the verbose
function
II. Specifying the source interface and source IP address for an FTP client
You can specify the source interface and source IP address for a switch acting as an
FTP client, so that it can connect to a remote FTP server.
Follow these steps to specify the source interface and source IP address for an FTP
client:
To do...
dir [ remotefile ] [ localfile ]
ls [ remotefile ] [ localfile ]
get remotefile [ localfile ]
put localfile [ remotefile ]
rename remote-source
remote-dest
user username
[ password ]
open { ip-address |
server-name } [ port ]
disconnect
close
quit
bye
remotehelp
[ protocol-command ]
verbose
Chapter 1 FTP and SFTP Configuration
Use the command...
1-9
Remarks
Optional
If no file name is specified,
all the files in the current
directory are displayed.
The difference between
these two commands is
that the dir command can
display the file name,
directory as well as file
attributes; while the Is
command can display only
the file name and
directory.
Optional
Optional
Enabled by default.