Snmp Test - H3C S3100 Series Operation Manual

Negative SD Number:30
Negative SD Sum:64
Negative SD average:2
Negative SD Square Sum:200
SD lost packets number:0
Unknown result lost packet number:0
[Sysname-hwping-administrator-Jitter] display hwping history administrator Jitter
HWPing entry(admin administrator, tag Jitter) history record:
Index Response
1
2
3
4
5
6
7
8
9
10
For detailed output description, see the corresponding command manual.

SNMP Test

Network requirements
Both the HWPing client and the SNMP Agent are H3C S3100 series Ethernet switches. Perform
HWPing SNMP tests between the two switches to test the time required from Switch A sends an SNMP
query message to Switch B (SNMP Agent) to it receives a response from Switch B.
Network diagram
Figure 1-7 Network diagram for the SNMP test
Configuration procedure
Configure SNMP Agent (Switch B):
# Start SNMP agent and set SNMP version to V2C, read-only community name to public, and
read-write community name to private.
<Sysname> system-view
[Sysname] snmp-agent
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent community read public
[Sysname] snmp-agent community write private
Status LastRC
274 1
278 1
280 1
279 1
280 1
270 1
275 1
263 1
270 1
275 1
Negative DS Number:24
Negative DS Sum: 41
Negative DS average:1
Negative DS Square Sum:161
DS lost packet number:0
Time
0 2000-04-02 08:14:58.2
0 2000-04-02 08:14:57.9
0 2000-04-02 08:14:57.6
0 2000-04-02 08:14:57.3
0 2000-04-02 08:14:57.1
0 2000-04-02 08:14:56.8
0 2000-04-02 08:14:56.5
0 2000-04-02 08:14:56.2
0 2000-04-02 08:14:56.0
0 2000-04-02 08:14:55.7
1-28