H3C S3100-52P Operation Manual page 639

Operation Manual – SNMP-RMON
H3C S3100-52P Ethernet switch
Create/Update the view
information
Follow these steps to configure basic SNMP functions (SNMPv3):
To do...
Enter system view
Enable SNMP
agent
Set system
information and
specify to enable
SNMPv3 on the
switch
Set an SNMP
group
Encrypt a
plain-text
password to
generate a
cipher-text one
Add a user to an
SNMP group
To do...
Use the command...
system-view
snmp-agent
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c | v3 }* |
all } }
snmp-agent group v3
group-name [
authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
snmp-agent
calculate-password
plain-password mode { md5
| sha } { local-engineid |
specified-engineid
engineid }
snmp-agent usm-user v3
user-name group-name
[ [ cipher ]
authentication-mode { md5
| sha } auth-password
[ privacy-mode { des56 |
aes128 } priv-password ] ]
[ acl acl-number ]
Use the command...
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
[ mask mask-value ]
—
Optional
Disabled by default.
You can enable SNMP agent
by executing this command or
any of the commands used to
configure SNMP agent.
Optional
By default, the contact
information for system
maintenance is "Hangzhou
H3C Technologies Co., Ltd.",
the system location is
"Hangzhou China", and the
SNMP version is SNMPv3.
Required
Optional
This command is used if
password in cipher-text is
needed for adding a new user.
Required
1-5
Chapter 1 SNMP Configuration
Remarks
Optional
By default, the view
name is ViewDefault
and OID is 1.
Remarks