Chapter 1 Web Authentication Configuration; Introduction To Web Authentication; Configuring Web Authentication - H3C S3100-52P Operation Manual

Hide thumbs Also See for S3100-52P:

Table of Contents

Operation Manual – Web Authentication

H3C S3100-52P Ethernet switch

Chapter 1 Web Authentication Configuration

When configuring Web authentication, go to these sections for information you are

interested in:

Web Authentication Configuration

Displaying and Maintaining Web Authentication

Web Authentication Configuration Example

1.1 Introduction to Web Authentication

Web authentication is a port-based authentication method that is used to control the

network access rights of users. With Web authentication, users are freed from installing

any special authentication client software.

With Web authentication enabled, before a user passes the Web authentication, it

cannot access any network, except that it can access the authentication page or some

free IP addresses. After the user passes the Web authentication, it can access any

reachable networks.

1.2 Web Authentication Configuration

1.2.1 Configuration Prerequisites

Configure an ISP domain and an AAA RADIUS scheme for the domain before

performing the following configurations.

Web authentication can use only a RADIUS authentication scheme; it does not

support local authentication and local RADIUS authentication.

The user number limit configured under an AAA scheme does not take effect for

Web authentication. Web authentication does not support accounting. Disable

accounting for the AAA scheme.

Follow these steps to configure Web authentication:

Chapter 1 Web Authentication Configuration

Table of Contents