Disabling An Interface From Receiving Ntp Messages; Displaying Ntp Configuration - H3C S3100-52P Operation Manual

Operation Manual – NTP
H3C S3100-52P Ethernet Switch
Follow these steps to configure the number of dynamic sessions allowed on the local
switch:
Enter system view
Configure the maximum
number of dynamic
sessions that can be
established on the local
switch

1.6.3 Disabling an Interface from Receiving NTP Messages

Follow these steps to disable an interface from receiving NTP messages:
Enter system view
Enter VLAN interface view
Disable an interface from
receiving NTP messages

1.7 Displaying NTP Configuration

Display the status of NTP
services
Display the information about the
sessions maintained by NTP
Display the brief information
about NTP servers along the
path from the local device to the
reference clock source
To do...
system-view
ntp-service
max-dynamic-sessions
number
To do...
system-view
interface Vlan-interface
vlan-id
ntp-service in-interface
disable
To do...
Use the command...
Use the command...
Use the command...
display ntp-service status
display ntp-service sessions
[ verbose ]
display ntp-service trace
1-17
Chapter 1 NTP Configuration
Remarks
—
Required
By default, up to 100
dynamic sessions can be
established locally.
Remarks
—
—
Required
By default, a VLAN
interface receives NTP
messages.
Remarks
Available in
any view