H3C S3100-52P Operation Manual page 867

Operation Manual – HWPing
H3C S3100-52P Ethernet Switch
Configure the HTTP
operation string and
version in an HTTP test
Start the test
Display test results
5) Configuring jitter test on HWPing client
Follow these steps to configure jitter test on HWPing client:
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
Configure the test type
Configure the destination
IP address
Configure the destination
port
Configure the source IP
address
To do...
http-string string version
test-enable
display hwping results
[ admin-name
operation-tag ]
To do...
system-view
hwping-agent enable
hwping
administrator-name
operation-tag
test-type jitter
destination-ip ip-address
destination-port
Port-number
source-ip ip-address
Use the command...
Use the command...
1-11
Chapter 1 HWPing Configuration
Remarks
Required
By default, HTTP
operation string and
version are not
configured.
Required
Required
You can execute the
command in any view.
Remarks
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group
is configured.
Required
By default, the test type is
ICMP.
Required
The destination address
must be the IP address of
a UDP listening service on
the HWPing server.
By default, no destination
address is configured.
Required
The destination port must
be the port of a UDP
listening service on the
HWPing server.
By default, no destination
port is configured.
Optional
By default, no source IP
address is configured.