Show Ip Pim Ssm - NETGEAR ProSafe M7100-24X User Manual

Term Definition
PIM Mode
Configured mode of PIM protocol (enabled or disabled).
Interface
Interface number.
Interface-Mode
Enable status of the interface.
Operational-Sta
Operational Status of the Interface.
tus
Example 1:
(Switch) #show ip pim
PIM Mode Dense
Interface Interface-Mode Operational-Status
--------- -------------- ------------------
1/0/1 Enabled
1/0/3 Disabled
Example 2:
(Switch) #show ip pim
PIM Mode Sparse
Interface Interface-Mode Operational-Status
--------- -------------- ------------------
1/0/1 Enabled
1/0/3 Disabled

show ip pim ssm

This command shows the configured source specific IP multicast addresses.
Format
show ip pim ssm
Mode
Privileged EXEC
Term Definition
Group Address
The address of the SSM Group.
Prefix Length
Prefix Length of the SSM Group.
(Switch) #show ip pim ssm
Group Address/Prefix Length
----------------------------
232.0.0.0/8
ProSafe Managed Switch
Operational
Non-Operational
Operational
Non-Operational
IP Multicast Commands
335