Show Ip Pim Ssm - NETGEAR ProSafe GSM7224P User Manual

Term Definition
PIM Mode
Configured mode of PIM protocol (enabled or disabled).
Data Threshold
Rate (in kbps) of SPT Threshold.
Rate)
Register
Rate (in kbps) of Register Threshold.
Rate-limit
Interface
Interface number.
Interface-Mode
Enable status of the interface.
Operational-Sta
Operational Status of the Interface.
tus
Example 1:
(Switch) #show ip pim
PIM Mode Dense
Data Threshold Rate (kbps) 0
Register Rate-limit (kbps) 0
Interface Interface-Mode Operational-Status
--------- -------------- ------------------
1/0/1 Enabled Operational
1/0/3 Disabled Non-Operational
Example 2:
(Switch) #show ip pim
PIM Mode Sparse
Data Threshold Rate (kbps) 500
Register Rate-limit (kbps) 100
Interface Interface-Mode Operational-Status
--------- -------------- ------------------
1/0/1 Enabled Operational
1/0/3 Disabled Non-Operational

show ip pim ssm

This command shows the configured source specific IP multicast addresses.
Format
show ip pim ssm
Mode
Privileged EXEC
Term Definition
Group Address
The address of the SSM Group.
Prefix Length
Prefix Length of the SSM Group.
(Switch) #show ip pim ssm
Group Address/Prefix Length
----------------------------
232.0.0.0/8
ProSafe Managed Switch
IP Multicast Commands
337