Table of Contents
Advertisement
Sending a fax with on-hook dialing or a handset:
manual transmission
Important:
Manual transmission is available only when you use the
ADF. You can also fax a document by dialing using either
the monitor speaker (this is called "on-hook" dialing) or
the optional handset. Here's how:
1. If the machine is already in Fax mode, skip to step 2.
If the machine is in Copy mode, press COPY/FAX to change to Fax
mode.
2. Insert the document into the ADF.
3. Adjust resolution and contrast if necessary.
If these are OK, skip to step 4. Otherwise, as desired:
Press RESOLUTION to change the resolution.
Press CONTRAST, then press
4. Obtain a dial tone. You can do this by either:
• Activating the monitor speaker (by pressing MONITOR/CALL).
•
...or...
• Lifting the handset.
In either case, the display shows:
_
5. Enter the fax number by using the numeric keypad.
Note: For information on entering one-touch and speed-dial
numbers, see pages 92-99.
919724032009_
Enter access codes along with the number, just as for a regular phone
call.
6. When you hear fax tones from the remote unit, press START.
Note: If a person answers the phone, tell him or her you're trying to
send a fax. When his/her machine sends you fax tones, then
press START.
or
to change the contrast.
** Tel Mode **
** Tel Mode **
58
Advertisement
Table of Contents
