Table of Contents
Advertisement
Note:
Whichever choice you make, you can override that choice
one transmission at a time by pressing MEMORY
TRANSMIT. (However, see the "Important" item, below.)
After completing the communication, your fax machine
will return to your desired transmission setting.
Note:
Although it's probably best to decide to transmit from
memory, be aware that certain types of documents can
quickly exhaust even your machine's large memory
supply. Obviously, documents with large numbers of pages
qualify; so do documents with lots of dark areas, since
darker pages create more data for your fax machine to
"remember" and send. When the machine's memory
supply is full, it can transmit only in normal (i.e., non-
memory) mode.
Important:
When you transmit using the FBS, your machine always
transmits from memory. This choice is available only
when you transmit using the ADF.
To make memory transmission the default for transmissions from the ADF:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
2. Press PROGRAM, J, 1, 3, ENTER.
Memory Tx:
If the setting you see is acceptable, skip to step 4.
Otherwise, proceed to step 3.
3. To change the setting, press PROGRAM once or twice. In this
example, we've chosen Off.
Memory Tx:
4. Press ENTER to save the setting.
On
Program/Enter
Off
Program/Enter
51
Advertisement
Table of Contents
