Table of Contents
Advertisement
15. Press ENTER to save the setting. The display will show the next
speed-dial number.
If you do not wish to enter any more speed-dial numbers, press STOP
to finish.
If you do not wish to enter the currently displayed speed-dial number
but do want to enter another speed-dial number, go back to step 3.
To enter this speed-dial number, go back to step 5.
Fax dialing via speed-dial
To dial a fax call using a speed-dial number:
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press COPY/FAX to change to Fax mode.
2. Insert the document
3. Adjust resolution and contrast if necessary.
4. Toggle between transmission from the feeder or from memory if
necessary, by pressing MEMORY TRANSMIT.
Note: This toggle affects only a transmission from the ADF.
Transmission from the FBS is always memory transmission.
5. Press SPEED DIAL/TEL INDEX. The display will show:
Enter Speed-Dial No.
S_
6. Use the numeric keypad to enter the three-digit identifier (such as
018, in this example) for the speed-dial number you want to dial. The
display will show:
Press Start
S018_
7. Press START.
The machine will handle the call from here. The sequence will vary
depending upon whether you specified transmission from memory or
transmission from the feeder.
104
Advertisement
Table of Contents
