Table of Contents
Advertisement
Setting it up, or initiating the initiation
For you to perform relay broadcast initiation, three things must be true:
• The remote machine must be a compatible Pitney Bowes fax machine
with "hub" capability.
Note: If you're not sure whether the unit to which you want to
transmit is a true "hub" unit, please consult the Pitney Bowes
Fax Diagnostic Center.
• The call group(s) must exist on the remote fax machine.
• You must know each call group's identifier number.
To set up a relay broadcast initiation:
1. Press COPY/FAX to change to the Fax mode, if necessary.
2. Insert the document and make any necessary adjustment as usual.
3. Press COMMUNICATION OPTIONS three times and then press
ENTER. The display will show:
Relax Tx
Group No.
4. Use the numeric keypad to enter the two-digit of each applicable call
group in the remote "hub" fax machine you'll be calling. You may
specify up to 10 groups for each relay broadcast initiation. Do not
press START. To add each group after the first one, press GROUP
DIAL to add a comma. Below, we've entered 2, GROUP DIAL, 4.
Relay Tx
Group No.
Important: Do not insert a comma after the last group number.
Note:
If you enter characters by mistake, just press CANCEL
to clear them before proceeding.
5. Press ENTER. The display will show:
Enter Fax Number
_
_
2, 4_
115
Advertisement
Table of Contents
