Table of Contents
Advertisement
4. Press ENTER to save the setting. The display shows the current
settings for the reduction margin:
Prnt Reduc Rate:
Margin (0-85mm):
If the setting you see is acceptable, skip to step 6.
Otherwise, proceed to step 5.
Note: This reduction margin setting will affect ADF (not FBS)
copying.
5. To change setting, use the numeric keypad to enter the reduction
margin you want. If necessary, press PROGRAM to move the cursor.
In this example, we've chosen 35mm.
Prnt Reduc Rate:
Margin (0-85mm):
6. Press ENTER to save the setting. The display now shows the
machine's current setting regarding half-page reception:
Half Page Recpt:
If the setting you see is acceptable, skip to step 8.
Otherwise, proceed to step 7.
7. To change the setting, press PROGRAM once or twice until your
choice appears. In this example, we've chosen On.
Half Page Recpt:
8. Press ENTER to save the setting.
91%
24
91%
35
Off
Program/Enter
On
Program/Enter
84
Advertisement
Table of Contents
