Continuous Polling - Pitney Bowes 4100 Operator's Manual

Continuous polling

To perform continuous polling from one or more remote fax machines:
1. Make sure that the polling document is actually set in the remote
machine.
2. Press COMMUNICATION OPTIONS, ENTER. The display will
show the current time:
Cont Polling
Start Time:
3. Use the numeric keypad to enter the time when your machine should
begin the continuous polling. Here, we've set it for 7:00 a.m.
Cont Polling
Start Time:
Note: To move the cursor to a specific digit, press
cursor leftward, or
4. When the start time is as you wish, press ENTER to save it. The
display will show:
Cont Polling
End Time:
5. Use the numeric keypad to enter the time when your machine should
finish the continuous polling. Here, we've set it for 3:00 p.m.
Cont Polling
End Time:
Note: If you set an end time earlier than the start time you entered
in step 3, the continuous polling will end at the selected end
time tomorrow.
Note: To more the cursor to a specific digit, press
cursor leftward, or
6. When the end time is as you want, press ENTER to save it. The
display will show:
Enter Fax Number
_
18:30
07:00
to move it rightward, to that digit.
07:00
15:00
to move it rightward, to that digit.
141
to move the
to move the