Table of Contents
Advertisement
5. Press ENTER. If the F-Code box is empty, the display shows:
03: Erase F-Code Box
F-Code Passcode: ****
If you have not set the passcode for your F-Code box, skip to step 8.
Important: If you select an F-Code box which is not empty, the
machine beeps and, before returning to step 3, briefly displays:
Select F-Code Box
Box In Use
Review the Important item before step 1 (previous page).
6. Use the numeric keypad to enter the proper four-digit passcode.
Here, we've entered 2345:
03: Erase F-Code Box
F-Code Passcode: 2345
7. Press ENTER.
If you entered an invalid passcode in step 6, the fax machine will
reject the attempt and abort this operation.
If you entered the correct passcode in step 6, the display will show:
03: Erase F-Code Box
Check
Note: If you want to quit without erasing the F-Code box you've
selected, press PROGRAM. The fax will return to step 2.
Note: If you want to quit without erasing any F-Code box, press
STOP. The machine will return to standby mode.
8. Press ENTER to erase the F-Code box.
Erase F-Code Box
To erase another F-Code box, repeat steps 3-8.
To finish, press STOP.
Program/Enter
** Complete **
190
Advertisement
Table of Contents
