Table of Contents
Advertisement
EasyStart
Your Pitney Bowes fax machine comes with EasyStart. It guides you in
entering the basic settings required for normal operation — so it's easy
for you to start using your machine quickly. (Of course, you can make
other settings later or change these settings. We'll explain in "Beyond the
basics," beginning on page 76.)
Clearing settings before beginning
Before using EasyStart, clear your machine's built-in user data memory,
which stores settings. This insures the memory will hold only your
settings.
Important:
After you use EasyStart, please do not clear the memory
again unless an authorized technician asks you to do so.
To clear the machine's memory:
1. Press COPY/FAX to change the Fax mode. Then press
PROGRAM, *, 2. The display now asks whether you're sure about
clearing the memory:
Clear User Settings
Check Program/Enter
Note: If you don't want to proceed, just press PROGRAM.
2. If you are sure, press ENTER to complete the process by clearing the
existing user data memory settings.
42
Advertisement
Table of Contents
